Bespoke Drinks Coasters

[Wal]

You'll laugh, Boyan.

I know how you like to see the workpiece bending and you're never really happy until you've sheared at least one fixture bolt in a day.!

Corian's very forgiving so you'll probably want to start at 20m/min, 1k on the spindle (chips not dust) and full flute length on the DOC. ;)

Off the top of my head I believe I was spinning at 15-16k and feed was around 5mm/sec.

These took a long time - to engrave the circular grooves took in the region of half an hour per coaster. I made a jig to hold four at a time and left the machine to it.

Wal.