Bespoke Drinks Coasters

[mekanik]

Cracking job Wal

[EddyCurrent]

Very nice indeed, what did you use to put the radius around the top edge ?

[Wal]

Thanks guys.

Eddy, I used a 3mm radius one of these:

https://www.shop-apt.co.uk/corner-ro...ide-45hrc.html

- you can see it in action here:

https://www.instagram.com/p/Bv-Zbb4n..._web_copy_link

They're really useful tools - I use mine a fair bit. You program it as a 1.5mm tool (tip diameter), touch off the tip and plunge it to a depth of 3mm - in reality you might want to leave it just shy of 3mm, too deep is less forgiving than a tiny bit too shallow...

Wal.

[needleworks]

Hats off to you Wal, those look fantastic, very nice

I've often thought about getting some corian, but could never find any offcuts and a full sheet would just be too expensive for playing around with.

[Wal]

Yeah - a full sheet set me back £780..!

I imagine I could have got it cheaper directly from the manufacturer, but they won't sell it to you unless you're an approved fabricator - ie. taken their instructional course in how to use it (cut, glue etc.)

You just need to get lucky in terms of finding off-cuts. A lot of what's out there has metallic flecks etc, so might not be suitable for the intended purpose.

Wal.

[cropwell]

Hi Wal,

What thickness was the corian sheet? did you have to cut it to thinner pieces ? I have some beige pieces left over from the kitchen refit, about 25mm thick. Not Corian but a stone filled acrylic, similar to the DuPont product, but half the price.

Cheers,

Rob

[Wal]

Hi Rob - is that the HI-MACS stuff? Heard that it's pretty much the same stuff, but like you say - much cheaper.

I was using 12mm thick sheet.

Wal.