Hybrid View
-
15-09-2021 #1
I assume this is at full speed ? If so saybe the parameters are not quite right as the voltage and frequency both vary to change the motor speed.
Maybe this will help to ensure parameters match the motor plate to get the full speed range:
https://inverterdrive.com/HowTo/inv/
-
19-02-2023 #2
I have a AT1 but looking at my manual for configuring inputs PTP it gives options 10 and 11 both as keying forward switching. I assume this is a typo and one should be keying stop.
I assume keying means recieving a momentary start command from a push button. So logically there must be an input to stop it once it is running?
-
02-06-2023 #3
Hi people.....
Does anyone use the RS485 on this VFD???
I cant seem to find any documentation for the pinout OR the address registers and data format for this drive. Not in any of the manuals I have seen so far.
Thread Information
Users Browsing this Thread
There are currently 6 users browsing this thread. (0 members and 6 guests)
Similar Threads
-
HELP! Colchester CNC 350 + Fanuc Series O-T Parameters - Diagnostics
By Constantin in forum Lathes, Lathe Rebuilding & ConversionsReplies: 1Last Post: 26-08-2019, 05:38 AM -
Generic Chinese VFD, no CE and no earth connection to exposed metal heatsink
By Jeff in forum Generic Chinese SpindlesReplies: 14Last Post: 19-10-2017, 02:34 PM -
3020 / 3040 / generic chinese router accuracy
By m_c in forum Machine DiscussionReplies: 2Last Post: 24-07-2014, 11:54 PM -
Optimize parameters for mills with tips
By hoezap in forum Tool & Tooling TechnologyReplies: 0Last Post: 15-06-2013, 01:18 PM -
G4 Dwell parameters
By mmcp42 in forum Programmers CornerReplies: 10Last Post: 31-12-2010, 04:49 PM
Bookmarks