Generic Chinese VFD, XSY-AT1 Programming Parameters/Settings

[tarawa]

XSY-AT1

P00-220v
P001-400hz
P002-110v
P003-200hz
P004-0
P005-0
P006-400hz
P007-0
P008-00000
P009-0
P010-1
P011-0
P012-1
P013-.5
P014-20
P015-0
P016-1
P017-1
P018-50
P019-50
P020-80
P021-2800
P022-10
P023-5
P024-6.0
P025-0 (# of poles =2)
P026-400hz
P027 thru P050- default
P050 thru P0067-default
P068-220v
P069-255v
P070 thru P077- default
P078 thru P085-7000mA
P086 thru P127-default

[routercnc]

I recently posted a video on this inverter for my drill press upgrade which might help


Depends on the motor you are trying to connect to but might give you more information.

[Len-Tikular]

Hi all.
I'm running a 2.2Kw Vevor spindle motor. When adjusting the Pot to increase spindle rpm I'm getting Error 1 (Current Overload) and the inverter trips.
I have set all parameters to the latest list posted. Under/Overvoltage is at 220/255 P78 Main current O/load is 7Amps
Any helpers out there ?

[Clive S]

Hi all.
I'm running a 2.2Kw Vevor spindle motor. When adjusting the Pot to increase spindle rpm I'm getting Error 1 (Current Overload) and the inverter trips.
I have set all parameters to the latest list posted. Under/Overvoltage is at 220/255 P78 Main current O/load is 7Amps
Any helpers out there ?

Just a thought have you checked the ramp speed seconds parameter

[Len-Tikular]

Just a thought have you checked the ramp speed seconds parameter

Thanks Clive, what's the Parameter number for that ?

[Clive S]

Thanks Clive, what's the Parameter number for that ?

Have you got a link to the manual