chipboard cutting with 35k-45k spindles

[Boyan Silyavski]

Don't have exact experience with this, but normally it's not the spindle, it's the router bit.

Questions should be what exact router bit and how much does it cost? a "normal" PCD diamond bits is around 250-300 euro and 18k rpm.


I cut laminate using CMT insert bits at 50 euro the bit and very cheap inserts. I believe this is the best normal bit for this job.



Where did you see a router bit for cutting laminate at 40k RPM and a PCD at same time?????


PS. If you have the guts to use 700e-1000e router bit, thats probably the best for your job https://www.mobiltecnica.com/es/cabe...ra-ensambles_1