Brummie, New Member Needs a Hand

[AndyUK]

[QUOTE=Brummie;109723]

Hi, the basics of cnc routers are the same,

Hi Terry appologies forthelate reply, Yes the programmes I do have is Mach3, I have Vectric Carve, and PhotoVCarve , The actual Machine I have is a 6090 CNCEST, 1500KW VFD,

As I said before I have built the machine, I obtained some spindle settings. I have tried to apply them and give up, On Mach3 I think I have tried to run one of the sample programmes but nothing happend what so ever, I have no CNC Knowledge only what I have seen on Youtube so in March this year i give up in frustration.

Brummie.

Heya Brummie, welcome to the forum.

Unfortunately you're being very vague about the problem. If you post more information we may be able to help. Try and answer the following:

• Pictures/Videos of the machine and the problem. Try to walk us through the process you're going through to get the machine to work, and the process you're going through to apply these settings.
• Basic machine information. Does it power up, does it move, how is it connected to the PC, wiring photos or better yet diagrams. At what stage does a problem occur?
• What are these settings you're trying to apply? Are they settings for the VFD itself, are they for the Mach3 software, or are they on VCarve?