[QUOTE=AndyUK;109725]
Quote Originally Posted by Brummie View Post

Heya Brummie, welcome to the forum.

Unfortunately you're being very vague about the problem. If you post more information we may be able to help. Try and answer the following:

  • Pictures/Videos of the machine and the problem. Try to walk us through the process you're going through to get the machine to work, and the process you're going through to apply these settings.
  • Basic machine information. Does it power up, does it move, how is it connected to the PC, wiring photos or better yet diagrams. At what stage does a problem occur?
  • What are these settings you're trying to apply? Are they settings for the VFD itself, are they for the Mach3 software, or are they on VCarve?
Hi Thanks for your help guys, Im not being vague at all, all I have noted on here is the sum total of what I know. I have turned the machine on 2 times since i bought it last year. nothing at all happens, so I turned it off and covered it up. I know absolutley zilch, Hence asking if anyone lives in south wales so I can watch what they do. I have no instructions at all no wireing diagrammes, I bought a V carve programme and bought Mach3 programme and a stand alone PC. .