Brummie, New Member Needs a Hand

[Clive S]

Hi Thanks for your help guys, Im not being vague at all, all I have noted on here is the sum total of what I know. I have turned the machine on 2 times since i bought it last year. nothing at all happens, so I turned it off and covered it up. I know absolutley zilch, Hence asking if anyone lives in south wales so I can watch what they do. I have no instructions at all no wireing diagrammes, I bought a V carve programme and bought Mach3 programme and a stand alone PC. .

Brummie. First welcome to the forum. If you want help you need to supply the information that people ask for but you are not doing this so it make it difficult to help. Nobody has a crystal ball that works.

Try and answer the questions you have been asked. It will all come together in time and we all have to learn.

[Brummie]

[QUOTE=Clive S;109735]Brummie. First welcome to the forum. If you want help you need to supply the information that people ask for but you are not doing this so it make it difficult to help. Nobody has a crystal ball that works.

All I asked was If anyone Lives in the south wales Area of either Newport, Cardiff or Swansea.? and would they mind coming around to SHOW mewhat to do. I do not know what scemetic means? UnlessI am physically shown ill never get it. sorry to waste your time.

[KAB]

I have similar issues.Is there a user group on the Wirral at all?

[Brummie]

I have similar issues.Is there a user group on the Wirral at all?

Hi Mucca, I am being asked questions I just know the answer too. I covered mine up and maybe have look at it again next year, I have give up now.


Brummie

[erasma]

I have similar issues.Is there a user group on the Wirral at all?

Hi KAB I am in Chester I could help you and Brummie - Maybe both of you can bring your machines and PC's around to my place and we can look at sorting them out. if all else fails I can show you Mach3 and how it works with my home made Plasma Table

Just send me a PM if interested

Mark