Thread: eMachineShop Upgrade
-
27-12-2021 #111
-
27-12-2021 #112
Matt, As far as I know when you have created an account in Dropbox using the same email address as on this forum ([email protected]) you should receive a link to Dropbox to allow the download of the files. It has worked for the other 40 users so I can't see why it should be different for you. Regards.
-
27-12-2021 #113
-
11-03-2022 #114
Hi,
Could my email [email protected] be add to the dropbox please.
Many thanks Gary
-
12-03-2022 #115
Gary, You should have the link on Dropbox for versions 1.932 and 1.935. Regards.
-
The Following User Says Thank You to Bladevane For This Useful Post:
-
30-03-2022 #116
I found it as well, it's working with no problems. The previous version was very troublesome though, and I lost a lot of files and documents which were very important. The good thing is that I managed to recover them back with the help of DATA RECOVERY SERVICES, and now I am being more careful of where I am saving my important files. It's always good to have an additional copy on an external hard disk, now I've learned my lesson and don't wanna repeat the same mistake twice.
Last edited by sandrahof; 05-04-2022 at 06:35 AM.
-
06-04-2022 #117
Hi there. I do not have dropbox installed. Is there any way to have the 1.932 version of the SW?
Thanks in advance
Regards
-
07-04-2022 #118
Hi Amarillis, The files are huge (106MB) so something similar to Dropbox is the preferred way to go. Regards.
-
07-04-2022 #119
So, I created my dropbox account: [email protected]
Can you please add me to the list?
Thank you
Regards
Amarillis
-
07-04-2022 #120
Hi Amarillis, All done. You should have access to versions 1.932 and 1.935. Regards.
Thread Information
Users Browsing this Thread
There are currently 3 users browsing this thread. (0 members and 3 guests)
Similar Threads
-
PC Upgrade Options?
By Chaz in forum General DiscussionReplies: 11Last Post: 31-08-2016, 04:53 PM -
Laser Upgrade
By dcrowder in forum Laser Machines & BuildingReplies: 8Last Post: 06-05-2016, 01:06 PM -
VFD upgrade
By paulus.v in forum Spindles & Drive MotorsReplies: 11Last Post: 05-11-2014, 11:09 PM -
Upgrade
By Dopy in forum General DiscussionReplies: 0Last Post: 09-11-2011, 01:57 AM -
BUILD LOG: Time for mk2 upgrade!
By routercnc in forum DIY Router Build LogsReplies: 16Last Post: 26-02-2011, 11:38 PM
Bookmarks