Thread: eMachineShop Upgrade
-
06-05-2024 #171
Hi Bladevane, please send me the old eMachineShop 1.932, 1.935 My email is: tsps at mail.com
Thanks,
JohnLast edited by jonhst; 08-05-2024 at 12:30 AM. Reason: email @ as : at
-
13-05-2024 #172
John,
Should be OK for you. Let me know if it works, or if it failed.
-
14-05-2024 #173
Hi,
it worked perfectly !.
This is what i did
(win10) :
1) I copied the file : ems.dat.1935.txt
(https://www.mycncuk.com/attachment.p...0&d=1649730249)
as:
C:\Users\Administrator\AppData\Roaming\eMachineSho p\ems.dat
2) I used RunAsDate (https://www.nirsoft.net/utils/run_as_date.html)
to open emachineshop as date: 30/07/2019
3) I pressed Ctrl+Alt+e
Then i could save dxf files.
Thank you VERY MUCH, Bladevane !!!!
Kind Regards,
John
-
14-05-2024 #174
John, Briliant. Thanks for letting me know. Good luck in your file transfer. I now use FreeCAD for DXF transfer, although other packages are available.
Thread Information
Users Browsing this Thread
There are currently 14 users browsing this thread. (0 members and 14 guests)
Similar Threads
-
PC Upgrade Options?
By Chaz in forum General DiscussionReplies: 11Last Post: 31-08-2016, 04:53 PM -
Laser Upgrade
By dcrowder in forum Laser Machines & BuildingReplies: 8Last Post: 06-05-2016, 01:06 PM -
VFD upgrade
By paulus.v in forum Spindles & Drive MotorsReplies: 11Last Post: 05-11-2014, 11:09 PM -
Upgrade
By Dopy in forum General DiscussionReplies: 0Last Post: 09-11-2011, 01:57 AM -
BUILD LOG: Time for mk2 upgrade!
By routercnc in forum DIY Router Build LogsReplies: 16Last Post: 26-02-2011, 11:38 PM
Bookmarks