eMachineShop Upgrade

[Big5Axis]

...

[mchad]

For those like me that used STL export primarily there is a workaround.

Since version V1.946 or V1.947 STL export option expires on June 30 you can used a program that sets the date prior to that date and run eMachineShop with no issue.

You can find the program here.

Hope it helps someone else as it did for me. This only help for STL export.

Hey, I'm not a machinist, and only a 3d printer user, but I just wanted to THANK YOU for this incredibly helpful information. I have been using EMS for years to design 3d parts and the .stl files for my Prusa slicer. After the recent update (no idea why I did that, for something like this, if it works, I usually leave it be...) removed .stl export until a $200 bounty was paid, I tried several design apps and none came close to the ease of use and simplicity EMS provides. So getting that back is tremendous. Were you in sunny florida, I'd buy you a beer.

Thanks very much. - Mike

And thanks to Bladevane for getting this thread going.

(BTW, I actually paid EmachineShop way too much money to fab a part for a FXR, a few years ago, so I don't feel too bad using their app for my own purposes!)