eMachineShop Upgrade

**Bladevane** · 12-03-2022

Gary, You should have the link on Dropbox for versions 1.932 and 1.935. Regards.

**amarillis** · 06-04-2022

Hi there. I do not have dropbox installed. Is there any way to have the 1.932 version of the SW?
Thanks in advance
Regards

**Bladevane** · 07-04-2022

Hi Amarillis, The files are huge (106MB) so something similar to Dropbox is the preferred way to go. Regards.

**amarillis** · 07-04-2022

Thank you very much!
SW received!
Regards
Amarillis

**amarillis** · 08-04-2022

Well, seem like I'm stucked again...
So, here is my workflow...
I work with the last EMS version available that is 1.950 at the moment...
After everything is done, I save the work using the emsx file type...
I open the file emsx with a text editor and remove the line CREATOR....
I open the file with the 1.932/1.935 version of EMS and export the work using the DXF format...
BUT, I tried to open the DXF file with FREECAD and nothing shows...
So I tried to save the file in the STL format using the 1.932 ver...
At this point a popup shows telling me to upgrade to the latest version and no STL is produced...
Since I only need to 3D print my work I really don't know what to do...
Moreover, I still do not understand where to put the EMS.DAT file since there is no APPDATA folder for the 1.932 version without an install procedure...
Any help?
Thanks
Regards