eMachineShop Upgrade

[Bladevane]

John,

Should be OK for you. Let me know if it works, or if it failed.

[jonhst]

Hi,

it worked perfectly !.

This is what i did
(win10) :

1) I copied the file : ems.dat.1935.txt
(https://www.mycncuk.com/attachment.p...0&d=1649730249)

as:
C:\Users\Administrator\AppData\Roaming\eMachineSho p\ems.dat

2) I used RunAsDate (https://www.nirsoft.net/utils/run_as_date.html)
to open emachineshop as date: 30/07/2019

3) I pressed Ctrl+Alt+e

Then i could save dxf files.

Thank you VERY MUCH, Bladevane !!!!

Kind Regards,
John

[Bladevane]

John, Briliant. Thanks for letting me know. Good luck in your file transfer. I now use FreeCAD for DXF transfer, although other packages are available.

[Mikmac]

Hi.
Would it be possible for me to gain access to an old copy?
Not sure how this works but I see people previous entered an email address.
[email protected]

[dudz]

I still use Emachineshop ( old version). I have yet to find such a simple to use CAD programme (free or for purchase). Just wish the 3D preview would work like it used to. Camabam is good but I find Emachineshop so much easier for designing/drawing. So I use Ems for cad and cambam for cam

[Bladevane]

Mike, Should be all sorted. Let me know if there are problems and I'll resend. Regards.

[Texas]

Hi Bladevane!

Would you be able to add me to the drop box as well? Larsson365 AT live.se

Best regards

[Bladevane]

All sorted. Let me know if you need more. Regards.

[jverban]

Gixer. Sure. Send me your email address and I will add you to the Dropbox folder which has versions 1.932 and 1.935.

Hey Buddy,

Can you also add me to the dropbox for these files, cheers
John

[Bladevane]

All should be sorted. Let me know if there are issues.