. .
Page 18 of 18 FirstFirst ... 8161718
  1. #171
    Hi Bladevane, please send me the old eMachineShop 1.932, 1.935 My email is: tsps at mail.com
    Thanks,
    John
    Last edited by jonhst; 08-05-2024 at 12:30 AM. Reason: email @ as : at

  2. #172
    John,

    Should be OK for you. Let me know if it works, or if it failed.

  3. #173
    Hi,

    it worked perfectly !.

    This is what i did
    (win10) :

    1) I copied the file : ems.dat.1935.txt
    (https://www.mycncuk.com/attachment.p...0&d=1649730249)

    as:
    C:\Users\Administrator\AppData\Roaming\eMachineSho p\ems.dat

    2) I used RunAsDate (https://www.nirsoft.net/utils/run_as_date.html)
    to open emachineshop as date: 30/07/2019

    3) I pressed Ctrl+Alt+e

    Then i could save dxf files.

    Thank you VERY MUCH, Bladevane !!!!

    Kind Regards,
    John

  4. #174
    John, Briliant. Thanks for letting me know. Good luck in your file transfer. I now use FreeCAD for DXF transfer, although other packages are available.

  5. Hi.
    Would it be possible for me to gain access to an old copy?
    Not sure how this works but I see people previous entered an email address.
    [email protected]

  6. I still use Emachineshop ( old version). I have yet to find such a simple to use CAD programme (free or for purchase). Just wish the 3D preview would work like it used to. Camabam is good but I find Emachineshop so much easier for designing/drawing. So I use Ems for cad and cambam for cam
    3 axis CNC/router / Alu profile frame....25mm Alu Cutting bed X=500mm Y=300mm Z=110mm.....Supported 25mm X rails ....Supported 20mm Y rails....Supported 20mm Z rails.....2.2kw Chinese WC spindle..... CSLAB CSMIO/IP-M 4-axis Ethernet Motion Controller....M542 Drivers..SY60STH86-3008BF Motors...running....Mach3 / Cambam / Emachineshop.

Page 18 of 18 FirstFirst ... 8161718

Thread Information

Users Browsing this Thread

There are currently 15 users browsing this thread. (0 members and 15 guests)

Similar Threads

  1. PC Upgrade Options?
    By Chaz in forum General Discussion
    Replies: 11
    Last Post: 31-08-2016, 04:53 PM
  2. Laser Upgrade
    By dcrowder in forum Laser Machines & Building
    Replies: 8
    Last Post: 06-05-2016, 01:06 PM
  3. VFD upgrade
    By paulus.v in forum Spindles & Drive Motors
    Replies: 11
    Last Post: 05-11-2014, 11:09 PM
  4. Upgrade
    By Dopy in forum General Discussion
    Replies: 0
    Last Post: 09-11-2011, 01:57 AM
  5. BUILD LOG: Time for mk2 upgrade!
    By routercnc in forum DIY Router Build Logs
    Replies: 16
    Last Post: 26-02-2011, 11:38 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •