Thread: eMachineShop Upgrade
-
06-05-2024 #171
Hi Bladevane, please send me the old eMachineShop 1.932, 1.935 My email is: tsps at mail.com
Thanks,
JohnLast edited by jonhst; 08-05-2024 at 12:30 AM. Reason: email @ as : at
-
13-05-2024 #172
John,
Should be OK for you. Let me know if it works, or if it failed.
-
14-05-2024 #173
Hi,
it worked perfectly !.
This is what i did
(win10) :
1) I copied the file : ems.dat.1935.txt
(https://www.mycncuk.com/attachment.p...0&d=1649730249)
as:
C:\Users\Administrator\AppData\Roaming\eMachineSho p\ems.dat
2) I used RunAsDate (https://www.nirsoft.net/utils/run_as_date.html)
to open emachineshop as date: 30/07/2019
3) I pressed Ctrl+Alt+e
Then i could save dxf files.
Thank you VERY MUCH, Bladevane !!!!
Kind Regards,
John
-
14-05-2024 #174
John, Briliant. Thanks for letting me know. Good luck in your file transfer. I now use FreeCAD for DXF transfer, although other packages are available.
-
22-06-2024 #175
Hi.
Would it be possible for me to gain access to an old copy?
Not sure how this works but I see people previous entered an email address.
[email protected]
-
23-06-2024 #176
I still use Emachineshop ( old version). I have yet to find such a simple to use CAD programme (free or for purchase). Just wish the 3D preview would work like it used to. Camabam is good but I find Emachineshop so much easier for designing/drawing. So I use Ems for cad and cambam for cam
3 axis CNC/router / Alu profile frame....25mm Alu Cutting bed X=500mm Y=300mm Z=110mm.....Supported 25mm X rails ....Supported 20mm Y rails....Supported 20mm Z rails.....2.2kw Chinese WC spindle..... CSLAB CSMIO/IP-M 4-axis Ethernet Motion Controller....M542 Drivers..SY60STH86-3008BF Motors...running....Mach3 / Cambam / Emachineshop.
-
23-06-2024 #177
Mike, Should be all sorted. Let me know if there are problems and I'll resend. Regards.
Thread Information
Users Browsing this Thread
There are currently 23 users browsing this thread. (0 members and 23 guests)
Similar Threads
-
PC Upgrade Options?
By Chaz in forum General DiscussionReplies: 11Last Post: 31-08-2016, 04:53 PM -
Laser Upgrade
By dcrowder in forum Laser Machines & BuildingReplies: 8Last Post: 06-05-2016, 01:06 PM -
VFD upgrade
By paulus.v in forum Spindles & Drive MotorsReplies: 11Last Post: 05-11-2014, 11:09 PM -
Upgrade
By Dopy in forum General DiscussionReplies: 0Last Post: 09-11-2011, 01:57 AM -
BUILD LOG: Time for mk2 upgrade!
By routercnc in forum DIY Router Build LogsReplies: 16Last Post: 26-02-2011, 11:38 PM
Bookmarks