Best place to buy Spindle and VFD?

[CharlieRam]

Cheers, I already have er20 collects for my mill and I have 1.5mm 4 core CY cable for the spindle, is that big enough?
I've found this one on EBay, looks right...what do you think?
https://rover.ebay.com/rover/0/0/0?m...2F262127534702

Sent from my SM-G920F using Tapatalk

[Clive S]

Cheers, I already have er20 collects for my mill and I have 1.5mm 4 core CY cable for the spindle, is that big enough?
I've found this one on EBay, looks right...what do you think?
https://rover.ebay.com/rover/0/0/0?m...2F262127534702

Sent from my SM-G920F using Tapatalk

That looks like it is similar to the one I linked to. 1.5mm is more that enough but make sure that you securely clamp the cable to the Z axis so that there is no strain on the plug as if the plug comes loose or breaks a wire it will let the magic smoke out of the VFD