Quote Originally Posted by john swift View Post

With the power off you can use a multimeter to check the resistance between the negative supply terminal and each isolated output

in the manual
http://www.cncdrive.com/downloads/AXBB_E_manual.pdf
see diagram 9.1.2 .Connecting a solid state relay (SSR)

test between 24V0 and Ox

You should find they are all open circuit unless the transistor controlling the relay is short circuited

John
It looks like I'm getting approximately 100 ohms on output 1 to ground, all other outputs are open.

Sent from my SM-G920F using Tapatalk