DIY Laser levelling using webcam and laser level

[devmonkey]

Joe,
The latest software version works perfectly and can be resized to fit nicely on my 'old' laptop. Thanks for all your effort.

Does the software work with a lens-less camera pointed directly at a laser pointer? I'm thinking you could arrange the pointer to provide a straight beam at a set height above a rail and detect how the spot moves around on the sensor as the camera backs away from the source on a carriage. Turning the camera 90 degrees allows measurement of horizontal and vertical errors. This is the quantum version of John's taught wire and requires a rigid, adjustable mount for the laser on the bed of the machine under test.

All,
I advise against trying to remove the optics from your cylindrically shaped, metal bodied, Mircosoft, auto-focus webcam. They're actually very solidly put together and mine is now a small pile of mangled bin-fodder. I've ordered a much more flimsy looking manual focus version from eBay (and a laser pointer).

Kit

Hi Kit,

At the moment the app is only performing a gaussian fit in 2D, i.e. one spatial dimension say Z and intensity. I could probably add a 3D fit which would allow you to use a dot laser.

The method I'm going to use will not require this as I think it is considerably easier to straighten in one dimension at a time having done some shimming and scraping in the past. I will use the laser horizontally to flatten the rail in Z with shims then rotate the laser and camera and straighten it in X, trying to do both at once is a nightmare in my experience, not from a measurement perspective but from an adjustment perspective. Since i'm only getting the errors in a straight line rather than trying to get the rail parallel with the laser it doesn't matter if the laser and camera move relatively to each other all over the place when you rotate them, the two operations (flatten then straighten) are entirely independent.

This is the camera I'm currently using, very easy to take apart and remount and only £7, works superbly.
https://www.amazon.co.uk/gp/product/B01L1XAQAS

Cheers, Joe