DIY Laser levelling using webcam and laser level

[John McNamara]

HI All

Well Put Joe. "Devmonkey"

This thread "is about developing a open source optical metrology system using very cheap components for the benefit of anyone who wants to measure anything accurately to few microns" The software you have written that forms the cornerstone of the project continues to evolve and mature.

When I first came across this thread in August 2019 It captured my imagination straight away, It continues to do this now 4 months later. It represents the work of many individuals now, all striving to improve it, by freely sharing their ideas on a world stage. The results will enable many builders and experimenters to achieve measurement accuracy previously only available at great expense.

Thanks Joe, the best is yet to come!

Regards
John