Quote Originally Posted by paulus.v View Post
You have mentioned that you will be using the CSMIO IP-M controller. This controller is using the industry standard 24V inputs and you can use either PNP or NPN sensors, the 10-30V type.



If you put the sensor on the moving part and have two metal triggers on each end of the axis you will actually need only 3 sensors, one for each axis. And yes, the sensors can be used as both home and limits.
For security reasons it is advisable to also have limit switches that will cut power to the machine before reaching the end of axis travel.
Yes, i got the IP-M controller.
Are you saying that i can use one sensor /axis that doubles as limit switch and homing switch or do i need one homing sensor + one limit switch /axis?
Btw im using a driver by the name 2HSS86H.