Large Format Epoxy Granite Gantry CNC - Looking For Feedback

[AndyGuid]

. . . . .

This is a tour of my workshop including my current CNC at around 13:00min.
https://www.youtube.com/watch?v=S1CnfRxpGjA

Thanks, I always enjoy workshop tours for the ideas I can glean from them.

In this instance, how to solve the sliding mitre saw space problem! :-)

[John McNamara]

Unless you want to do angle cuts. you will still have to move the saw forward unless you make quite a big hole.

A sliding table with a strong locking mechanism to bring the saw forward may be a better solution.
Makita saws have a carrying position at 45 deg that makes the saw a lot more compact. You may not need to make a hole.
I guess most saws have the same parking feature.