-
19-09-2019 #91
Now I have seen the pics, I get the bigger picture. The QTCL BoB is a parallel port BoB - BUT - in this case it is being driven by the PCF08094 which is an ethernet interface.
You have two options :-
Set up the Ethernet address as Jazz says (which is the better way to go!)
or plug the QTCL BoB into your printer port with an appropriate printer cable adapter like this one - If you could find one (I am not selling mine!)
-
21-10-2019 #92
The printer port connects to the PCF08094 board - which then connects to the Bob via a ribbon cable ( This is how it was when I bought it and worked).
So are you saying to unplug the ribbon cable that currently connects the print port to the PCF08094 board and connect it directly to the bob?
I have uploaded a video which mite make things clearer
Sent from my iPhone using Tapatalk
-
21-10-2019 #93
One of the ribbon cables connects to the parallel port. The Ethernet cable runs to the control panel on the front of the machine - the board the Ethernet cable comes from is
PCF08094 DS0809
EAST CRYSTAL Rev:1.0
And the one below it which connects to the parallel port is
PCF 07483
EAST CRYSTAL Rev1.1
Ds0807
Sent from my iPhone using TapatalkLast edited by IhateDoug; 21-10-2019 at 04:14 PM.
-
21-10-2019 #94
-
07-02-2020 #95
Seems it’s the breakout board - I bought a cheap one + new drivers - Am having trouble wiring it however there is life, spindle comes on when powered (can’t turn off, can control the speed via the inverter and that’s it and z axis moves up (both keys make it go up), the limit switches are now showing in the diagnostics page and if I home the machine it seems to move in all directions - Estop switch is broken and Will be replacing and the estop button in Mach3 doesn’t stop it - so I quickly pulled the power shortly after it started moving, but seems like it moved in all directions.
How I wired it
Sent from my iPhone using Tapatalk
-
27-02-2021 #96
Hi all, I am new with CNC, but I have try to get my CNC working but apparently if I don't have the conexions from the board os the picture to the drivers, it is impossible to make it work, So there is any has found the pins and dir conections that I can put on Mach3 to make my CNC from Marchant Dice Ltd. working? See pictures attach,
Do I need to disassemble the box to find out how they are connected?
thank you very much in davance for your help, I am going crazy, I can not find any information about this card: Bazyx east crystal pcf 07343 five axis cnc board Rev. 1.4
-
27-02-2021 #97
It looks like I have the old fashion card, but does anyone has the pins and dir conections for the step-motors fo the CNC machine from Marchant Dice Ltd. I can not make it work, and I can not find any information about it, only this post and the card doesn't look the same. Can you help me? see attach pictures
Thread Information
Users Browsing this Thread
There are currently 2 users browsing this thread. (0 members and 2 guests)
Similar Threads
-
syil x4
By geoff in forum Machine DiscussionReplies: 8Last Post: 30-11-2016, 07:35 PM -
FOR SALE: For Sale Syil X7 plus CNC Milling machine
By dpcwright in forum Items For SaleReplies: 1Last Post: 13-09-2015, 02:27 PM -
Syil x4 or x5 as CAD/CAM training 4 axis CNC machine ???
By towdi.arek in forum Marketplace DiscussionReplies: 3Last Post: 20-07-2013, 07:26 AM -
What i am doing wrong with mach3?? trying to config machine.
By scnc in forum Artsoft Mach (3 & 4)Replies: 39Last Post: 31-01-2013, 05:01 AM -
thinking about this Syil X5plus CNC Milling Machine with 4th Axis
By Dellboy in forum Marketplace DiscussionReplies: 8Last Post: 22-04-2012, 05:52 PM
Bookmarks