Threaded View
-
18-08-2019 #1
Noob needing a hand to trouble shoot what’s wrong with my machine.
Info
Syil x4
Mach 3
Was working fine up until moving it. Since reconnecting it to the pc - the pc has no control what so ever, as if the the cords not connected.
I have
- Checked all boards have power with a multi meter
-checked the ports configured
-checked the parallel cable is plugged in, checked continuity of cable and replaced the cable
-replaced the pc (was on it way out anyway)
-I jumped the COM and FWD pins on the inverter and the spindle starts (sunfar E300)
-checked the diagnostics screen for life and no limit switch’s show, e-stop doesn’t show, is literally as if the machine is not plugged into the pc
-Just ran the “config check” in Mach3 and seems “output 7” is configured wrong?
Have read through a heap of threads but am really quiet clueless where to start looking, any input would be greatly appreciated
Thread Information
Users Browsing this Thread
There are currently 5 users browsing this thread. (0 members and 5 guests)
Similar Threads
-
syil x4
By geoff in forum Machine DiscussionReplies: 8Last Post: 30-11-2016, 07:35 PM -
FOR SALE: For Sale Syil X7 plus CNC Milling machine
By dpcwright in forum Items For SaleReplies: 1Last Post: 13-09-2015, 02:27 PM -
Syil x4 or x5 as CAD/CAM training 4 axis CNC machine ???
By towdi.arek in forum Marketplace DiscussionReplies: 3Last Post: 20-07-2013, 07:26 AM -
What i am doing wrong with mach3?? trying to config machine.
By scnc in forum Artsoft Mach (3 & 4)Replies: 39Last Post: 31-01-2013, 05:01 AM -
thinking about this Syil X5plus CNC Milling Machine with 4th Axis
By Dellboy in forum Marketplace DiscussionReplies: 8Last Post: 22-04-2012, 05:52 PM
Bookmarks