Quote Originally Posted by Doddy View Post
Let's test that the inputs into the parallel port are being read correctly by Mach3.

Use a jumper to short from pin 25 (GND) to pin 10 - on the PC's parallel port...

Click image for larger version.  Name: IMG_2390.jpg  Views: 5242  Size: 291.9 KB  ID: 26297

On the diagnostic page...

Click image for larger version.  Name: IMG_2391.jpeg  Views: 5390  Size: 463.3 KB  ID: 26298

Move to 25->11

Click image for larger version.  Name: IMG_2392.jpeg  Views: 5161  Size: 301.4 KB  ID: 26299

25->12:-

Click image for larger version.  Name: IMG_2393.jpeg  Views: 5239  Size: 393.7 KB  ID: 26300

25->13:-

Click image for larger version.  Name: IMG_2394.jpeg  Views: 5175  Size: 513.8 KB  ID: 26301

25->15 (NOTE: skip 14 - that's an output!, not input):-

Click image for larger version.  Name: IMG_2395.jpg  Views: 5298  Size: 262.2 KB  ID: 26302

Confirm that behaviour then we're confident that the parallel port inputs are able to be monitored by Mach3.
Normal
Click image for larger version.  Name: IMG_0011.jpg  Views: 2687  Size: 432.0 KB  ID: 26308

10
Click image for larger version.  Name: IMG_0011.jpg  Views: 2691  Size: 411.0 KB  ID: 26309

11
Click image for larger version.  Name: IMG_0011.jpg  Views: 2641  Size: 341.9 KB  ID: 26310

12
Click image for larger version.  Name: IMG_0011.jpg  Views: 2763  Size: 275.0 KB  ID: 26311

13
Click image for larger version.  Name: IMG_0011.jpg  Views: 2666  Size: 392.6 KB  ID: 26312

15
Click image for larger version.  Name: IMG_0011.jpg  Views: 2627  Size: 368.0 KB  ID: 26313


Sent from my iPhone using Tapatalk