Troubleshooting non responsive machine- Mach3/Syil x4

[Raul]

Seems it’s the breakout board - I bought a cheap one + new drivers - Am having trouble wiring it however there is life, spindle comes on when powered (can’t turn off, can control the speed via the inverter and that’s it and z axis moves up (both keys make it go up), the limit switches are now showing in the diagnostics page and if I home the machine it seems to move in all directions - Estop switch is broken and Will be replacing and the estop button in Mach3 doesn’t stop it - so I quickly pulled the power shortly after it started moving, but seems like it moved in all directions.




How I wired it




Sent from my iPhone using Tapatalk

Hi all, I am new with CNC, but I have try to get my CNC working but apparently if I don't have the conexions from the board os the picture to the drivers, it is impossible to make it work, So there is any has found the pins and dir conections that I can put on Mach3 to make my CNC from Marchant Dice Ltd. working? See pictures attach,
Do I need to disassemble the box to find out how they are connected?

thank you very much in davance for your help, I am going crazy, I can not find any information about this card: Bazyx east crystal pcf 07343 five axis cnc board Rev. 1.4