Engraving laminate

**johngoodrich** · 29-08-2019

how about here
https://908ltd.co.uk/

**cropwell** · 31-08-2019

Originally Posted by johngoodrich

how about here
https://908ltd.co.uk/

Thanks John, I have bookmarked it for next purchase, when I need a colour I don't have.

Rob-T

**Voicecoil** · 31-08-2019

Just do a search for Traffolyte sheet - that's the stuff we used to use for designation strips on installations.

PS completely agree with your verdict on Windoze10 - I will never buy another machine that has it installed.

**cropwell** · 31-08-2019

Originally Posted by Voicecoil

PS completely agree with your verdict on Windoze10 - I will never buy another machine that has it installed.

I have heard that Microshit has realised their mistake on the single platform model that they called Win10 and are looking to get another operating system out ASAP. Their advice to windows10 phone users is 'buy an iPhone or Android' - best thing they have said in years! - I took that advice already !

Rob-T

Back to topic.....

908ltd will cut the sheets down to size and it makes buying 12 300x200mm pieces quite a reasonable prospect. My current stock is down to 9 or 10 sheets (300x200) limited to black on white, white on black, red on white and silver on black, but I will wait until someone is not satisfied with that range before buying any more.

I have had good results with fibreglass PCB material (single sided copper) - spray copper side with colour of choice and after engraving, light it from behind. The copper gives a solid light barrier and the translucent fibreglass shows up the engraved areas. It also looks good with a polished copper finish.

R