Thread: Spindle cable a bit stiff??
-
02-09-2019 #1
So some 4 core CY 1mm2 cable landed from Farnell on Friday to wire up the spindle - however it's rather on the stiff side, I'm wondering is it worth splashing out on some Lapp Olflex 810 at £4.20/metre, will it be that much better?? or does anyone know of a source of a nice flexible type please?
-
05-09-2019 #2
-
05-09-2019 #3
I'm using 4 core 1mm CY. Seems stiff at first, but it will run through a cable chain and move about just fine. At my last job, we used the same stuff in bigger sizes. It will soften up.
Last edited by Nealieboyee; 05-09-2019 at 06:49 PM.
-
05-09-2019 #4
Cheers for the advice guys, I'll give it a go.
-
09-09-2019 #5
I also made sure that there was an extra loop of cable so that it moved more freely, and clipped the cable near the plug on the spindle to make sure that there was no movement between plug and cable - can lead to internal connections fracturing over time.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Porter + Cable spindle
By kell in forum Items For SaleReplies: 3Last Post: 26-06-2021, 12:10 PM -
Which thickness CY cable do I need for 1.5kW spindle?
By bee in forum Generic Chinese SpindlesReplies: 44Last Post: 19-03-2017, 08:43 AM -
1.5 kw Chinese spindle cable
By 142victoria in forum Generic Chinese SpindlesReplies: 4Last Post: 02-11-2015, 09:53 AM -
VFD Cable and 2.2kw spindle wiring
By Flamered in forum Spindles & Drive MotorsReplies: 7Last Post: 24-08-2012, 07:29 PM -
Stiff 1610 ballscrews, need help.... asap.
By ccmarco in forum Lead Screws, Nuts & SupportsReplies: 10Last Post: 05-12-2010, 10:01 AM
Bookmarks