-
09-09-2019 #1
-
10-09-2019 #2
-
10-09-2019 #3
Neal - thanks for the reply, but those aren't quite what I'm looking for. The Stepcraft machines have the gantry side plates running in a slot with a flexible rubber(?) strip either side to stop swaft getting down into the ballscrews, guides, belts whatever, sorry the photo's not very good. I've looked at rubber draught excluder strips, but all I've seen so far are a bit on the stiff side
-
10-09-2019 #4
Hi Voicecoil
https://jehbco.com.au/
This company will have the extrusion you are looking for.
It can be rolled up and posted
Regards
John
-
11-09-2019 #5
Thanks John, I hadn't thought of silicone, I was expecting polyurethane or natural rubber from the abrasion resistance angle.
-
11-09-2019 #6
-
11-09-2019 #7
I know the kind of thing you're after, however I've got no idea what it's official name is, let alone where you can buy it.
A bigger rubber version is often used on roller/shutter doors, but the thinner harder plastic version is fitted to some 2 post car lifts.Avoiding the rubbish customer service from AluminiumWarehouse since July '13.
-
12-09-2019 #8
Yes, flexibility is the key, so it will mould/seal itself around the moving bits. I've used slider potentiometers/faders on audio and lighting control desks in the past that have had a thinner version of this stuff covering the actuator slots but it came as part of the unit from the Far East.
Last edited by Voicecoil; 12-09-2019 at 12:04 AM.
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
WANTED: 75mm or longer Flexible Brush strip.
By JAZZCNC in forum Items WantedReplies: 14Last Post: 16-11-2016, 09:20 AM -
Brush Strip
By pwestuk in forum Items On eBay UKReplies: 6Last Post: 02-02-2015, 07:45 PM -
Air cooling/SWARF removal
By m.marino in forum General DiscussionReplies: 14Last Post: 01-07-2012, 12:39 PM -
FOR SALE: Open End 3M HTD Rubber belt 15mm wide
By wiatroda in forum Items For SaleReplies: 0Last Post: 22-06-2011, 03:49 PM -
Looking for Vacuum/Swarf extraction tubing
By m.marino in forum Machine DiscussionReplies: 2Last Post: 18-08-2009, 12:35 AM
Bookmarks