Help needed to connect my VFD to the AXBB controller

[Doddy]

https://www.emcstandards.co.uk/cable...t-one-end-only is an interesting read.

Ask 10 people and you'll get 12 different replies.

I work in an industry where EM emissions and susceptibility are treated very seriously, and at relatively high power levels. Power systems (emissives) are typically, within these systems, shielded both ends.

You'll find that as the VFD is placed under load it will present some of the heavier switching currents onto it's supply lines. Hence the ferrites. But, horses for courses.