DXF conversion

**cropwell** · 19-09-2019

Am I missing something (other than a brain)?

I have googled DRBL and can't see how Diskless Remote Boot for Linux is relevant to CNC. Is the OP just a typo for GRBL?

**routerdriver** · 19-09-2019

If you can use Inkscape you might find this page helpful https://www.norwegiancreations.com/2...sing-inkscape/ .I find Inkscape a hugely frustrating piece of software ,but for somebody whose mind is wired in such a way as to understand the thing it might be enough.

**cropwell** · 19-09-2019

Originally Posted by routerdriver

I find Inkscape a hugely frustrating piece of software ,but for somebody whose mind is wired in such a way as to understand the thing it might be enough.

I know what you mean about Inkscape, it is a bit 'written by geeks, for geeks'. Thanks for the link, if you google 'inkscape gcode' you get a few links which may be useful, but I haven't had time to look at them. I have used Inkscape to generate dxf files from scans, but I use Estlcam for Gcode generation, it is easier.

As an aside google 'askew' - it took my wife a while to see the joke!

Rob-T