Closed loop stepper motor kit power supply

[JAZZCNC]

Hi Jazz
No need to reply on this. I've just checked out some of your previous posts, which lets me think that staying with what I have will be good enough for what I need.

Cheers

Andrew

Too Late....Lol

[the great waldo]

Too Late....Lol

Well youv'e got me thinking after your last reply. I can you the bits I have to upgrade an older machine and don't mind spending a few bob on something that runs better and I will be doing a fair amount of 2.5/3d cutting, and i'm getting old so anything that runs a bit better (quicker smoother ) i'm happy to invest in. Now the killer question is are the stepperonline kits ok (they seem to have great prices and there seems to be a 5% discount for us members) or should I look around a bit.
Cheers
Andrew

[JAZZCNC]

Now the killer question is are the stepperonline kits ok (they seem to have great prices and there seems to be a 5% discount for us members) or should I look around a bit.
Cheers
Andrew

I've only used this brand on one machine and they worked fine. No better or worse than any of the others I've used and that includes Leadshine.
I did Kill one drive but that was my fault oversizing the PSU which is why I know they don't tolerate Overvoltage.!

[the great waldo]

Thanks good to know.
Cheers

Andrew

[Kitwn]

Many of the Stepperonline drivers have 'Leadshine' written on them as well and their part numbers generally match. One of the reasons I've used them in the past is that buying a 'Stepperonline' driver from Stepperonline seems like a good way to guarantee I'm not getting a counterfeit Leadshine driver.

Kit

[JAZZCNC]

Many of the Stepperonline drivers have 'Leadshine' written on them as well and their part numbers generally match. One of the reasons I've used them in the past is that buying a 'Stepperonline' driver from Stepperonline seems like a good way to guarantee I'm not getting a counterfeit Leadshine driver.

Kit

Can't really say that for certain because I've had drives that look identical to Leadshine with matching numbers etc but when you open them up you can clearly see they are not made by leadshine as the quality is terrible. The counterfeiters are very clever and don't miss a trick regards Visuals and identifcations.

Unless Stepper online sell them as Leadshine drives and if they where genuine leadhsine why wouldn't they.? I wouldn't it take they are Leadshine.!

[Kitwn]

Some of the drivers have both Leadshine and Stepperonline logos. The manual says "designed by Stepperonline. Manufactured by Leadshine". I'll let you make up your own mind.

https://www.omc-stepperonline.com/di...or-dm320t.html

Kit