4x4 cnc router

[Kn8]

thanks, Would these be suitable ? ebay item no...220419398372
i like how these look

Hi Kingfisher
Looking on the Neutrik website the five pin plug, the contacts are rated at 7.5A which is fine.
One disadvantage with these connectors is you will need to mount them so that they cannot be knocked and become accidently unplugged while in use as this may damage the related drive.

Kn8

[irving2008]

These are what I used... 4pin plus overall case screen, screw down locking... ok for 6A steppers...

[kingfisher]

These are what I used... 4pin plus overall case screen, screw down locking... ok for 6A steppers...

thanks irving2008

Please if you have time a little help on the wiring of the motors for Bipolar Parallel, Had a look at the drawings with no hope! i would really appreciate some help. I have all the parts i need now fuses, wire ,connectors etc.i will have a go over the weekend :heehee:

[Gary]

You can buy those connectors in maplin.
I used them on my x3 conversion.

[irving2008]

You can buy those connectors in maplin.
I used them on my x3 conversion.

True, but at maplin they are £4 a pair plus postage... thats £15 instead of £6...

[Gary]

Just saying if you have a maplins near you.
We have two near us, and i needed the connectors that day so made it easy

True, but at maplin they are £4 a pair plus postage... thats £15 instead of £6...

[irving2008]

Just saying if you have a maplins near you.
We have two near us, and i needed the connectors that day so made it easy

Point taken Gary, as long as they have them in stock..

I have one Maplins near home and two near work.... and they NEVER seem to have anything I need in stock... too busy selling cheap, crap, R/C helicopters that die after 3min flight...

having said that, today I could buy 3 pairs of connectors as long as I visited all 3 Maplins... life's too short!