Well, definetly I'm not the first. There is a german company which is selling the CNCd version of the machine.

But there are no details or pictures available and no endusers to be found.

For this conversion the most difficult part is fitting the ballscrews for the X and Z.

The space is tight and some milling of the saddle is needed to fit 16mm ballnuts. I have doubt a 20mm ballnut can fit without requiring too much milling and endangering the casting integrity.

This is why I search for other owners. So I can exchange some ideas based on the experience with the real machine.

Sent from my SM-A520F using Tapatalk