Hybrid View
-
11-10-2019 #1
If the servos have only be running of 70VDC, then they won't have been running at the full speed anyway (for electric motors, voltage = speed, current = torque).
Those leadshine drives do look like they'd be capable. CNC Drive also do suitable drives (http://cncdrive.com/DG4S_08020.html for 80VDC/20A version).
The key to using those will be making sure the encoders are suitable. You need quadrature encoders, not resolvers which your machine might just be old enough to have.
For modern servo drives, the tacho output from the motor is generally not needed.
Z axis you can do however you want. It's not likely to have a lot of travel, or need to move that fast, so a suitably geared Nema 23/4 motor is likely to be a good option. You will however still need a driver for it.
You'll also need a breakout board of some form, but I would advise against using a parallel port, as it won't be fast enough to get the maximum benefit from the servos.Avoiding the rubbish customer service from AluminiumWarehouse since July '13.
-
The Following User Says Thank You to m_c For This Useful Post:
-
12-10-2019 #2
-
13-10-2019 #3
I would guess that is a quadrature output incremental encoder, however searches have not found any manuals for a 755 encoder.
How many wires does it have?
Ideally you want encoders with differential outputs, which means you're looking at a minimum of 6 wires (+V, Gnd, A-, A+, B-, B+), plus possibly an index pulse (Z-, Z+).
Everything has the potential for failure, but provided you're willing to learn, then most things are possible.Avoiding the rubbish customer service from AluminiumWarehouse since July '13.
Thread Information
Users Browsing this Thread
There are currently 4 users browsing this thread. (0 members and 4 guests)
Similar Threads
-
BUILD LOG: Finished builds picture menu
By routercnc in forum DIY Router Build LogsReplies: 9Last Post: 05-12-2021, 12:28 PM -
NEW MEMBER: New member AGORS
By agors in forum New Member IntroductionsReplies: 2Last Post: 10-10-2019, 09:50 PM -
picture conversion to DFX/ Gcode. Help required please.
By Gasgasbones in forum Programmers CornerReplies: 17Last Post: 19-12-2014, 11:42 AM -
Microcarve picture carving software
By cnctoybox in forum CAD & CAM SoftwareReplies: 0Last Post: 26-03-2012, 07:00 PM -
Router/Spindle choice for Makita laminate trimmer upgrade
By CraftyGeek in forum Makita Routers & TrimmersReplies: 7Last Post: 30-11-2009, 11:23 AM
Bookmarks