Rye CNC Router upgrade (w Picture) - Agors

**Thomas.f** · 24-10-2019

Hey Welcome to the Rye club from New Zealand!

Here is my Rye MG3000 which we acquired about a year ago. I am currently doing a full rebuild and retrofit of the control systems, moving to a DSPMC/IP, keeping the original Servo amplifiers and Tachometers in place. There is a lot of work in it!

Hope all goes well with your machine they are quite rare!

Click image for larger version.

Name: IMG_20171215_111830.jpg
Views: 2294
Size: 215.3 KB
ID: 26655

Click image for larger version.

Name: IMG_20180112_183342.jpg
Views: 2292
Size: 232.4 KB
ID: 26654

**Barry** · 26-12-2021

Originally Posted by Thomas.f

Hey Welcome to the Rye club from New Zealand!

Here is my Rye MG3000 which we acquired about a year ago. I am currently doing a full rebuild and retrofit of the control systems, moving to a DSPMC/IP, keeping the original Servo amplifiers and Tachometers in place. There is a lot of work in it!

Hope all goes well with your machine they are quite rare!

These bring back fond memories i operated these machines for some years.