Quote Originally Posted by AndyGuid View Post
Welcome to the forum Billy!
.
What Make/Model/Size/Type machine did you buy, and what do you intend to mainly use the machine for?
.
Andy
Hi Andy.
This is what I have bought
1230 x 755 mm cutting area.
20mm high precision Hi-Win Profiled linear rails on all axis,
20mm Dia 10mm pitch Ballscrew on Long axis.
16mm Dia 10mm pitch on Gantry axis
16mm Dia 5mm Pitch on Z axis.
All Ball screws are mounted with Angular Contact BK bearing blocks.
2.2Kw ER20 (1-13mm shank sizes) 24000Rpm Spindle with VFD and Water pump.
4Nm Nema 23 Stepper motor on Long axis.
3.1Nm Nema 23 Stepper motors on other Axis.
4 axis csmio/ip-m Ethernet Motion controller with 24Vdc I/O System and Spindle speed Controller.
Leadshine Digital AM882 drives with stall detect.
Drives powered with Custom built 70Vdc Toroidal transformer.
24Vdc latching E-stop safety system controlling all High voltage devices.Inductive Homing and Limit switches on all axis.All cables shielded and running inside protective energy chain or conduit. Twin fan cooled Electrical compartment.