hi Folks

[Bopper1968]

Welcome to the forum Billy!
.
What Make/Model/Size/Type machine did you buy, and what do you intend to mainly use the machine for?
.
Andy

Hi Andy.
This is what I have bought
1230 x 755 mm cutting area.
20mm high precision Hi-Win Profiled linear rails on all axis,
20mm Dia 10mm pitch Ballscrew on Long axis.
16mm Dia 10mm pitch on Gantry axis
16mm Dia 5mm Pitch on Z axis.
All Ball screws are mounted with Angular Contact BK bearing blocks.
2.2Kw ER20 (1-13mm shank sizes) 24000Rpm Spindle with VFD and Water pump.
4Nm Nema 23 Stepper motor on Long axis.
3.1Nm Nema 23 Stepper motors on other Axis.
4 axis csmio/ip-m Ethernet Motion controller with 24Vdc I/O System and Spindle speed Controller.
Leadshine Digital AM882 drives with stall detect.
Drives powered with Custom built 70Vdc Toroidal transformer.
24Vdc latching E-stop safety system controlling all High voltage devices.Inductive Homing and Limit switches on all axis.All cables shielded and running inside protective energy chain or conduit. Twin fan cooled Electrical compartment.

[Clive S]

Welcome to the forum Andy
This sounds like a nice high spec machine

[JAZZCNC]

Hi Andy.
This is what I have bought
1230 x 755 mm cutting area.
20mm high precision Hi-Win Profiled linear rails on all axis,
20mm Dia 10mm pitch Ballscrew on Long axis.
16mm Dia 10mm pitch on Gantry axis
16mm Dia 5mm Pitch on Z axis.
All Ball screws are mounted with Angular Contact BK bearing blocks.
2.2Kw ER20 (1-13mm shank sizes) 24000Rpm Spindle with VFD and Water pump.
4Nm Nema 23 Stepper motor on Long axis.
3.1Nm Nema 23 Stepper motors on other Axis.
4 axis csmio/ip-m Ethernet Motion controller with 24Vdc I/O System and Spindle speed Controller.
Leadshine Digital AM882 drives with stall detect.
Drives powered with Custom built 70Vdc Toroidal transformer.
24Vdc latching E-stop safety system controlling all High voltage devices.Inductive Homing and Limit switches on all axis.All cables shielded and running inside protective energy chain or conduit. Twin fan cooled Electrical compartment.

That sounds like one of my machines.! How do I know that.? Because that listing is pretty much word perfect what I wrote.
If it is then you have a good machine.

[Clive S]

That's what I thought as well Dean

[AndyUK]

Welcome Billy

Hi Andy.
This is what I have bought
1230 x 755 mm cutting area.
20mm high precision Hi-Win Profiled linear rails on all axis,
20mm Dia 10mm pitch Ballscrew on Long axis.
16mm Dia 10mm pitch on Gantry axis
16mm Dia 5mm Pitch on Z axis.
All Ball screws are mounted with Angular Contact BK bearing blocks.
2.2Kw ER20 (1-13mm shank sizes) 24000Rpm Spindle with VFD and Water pump.
4Nm Nema 23 Stepper motor on Long axis.
3.1Nm Nema 23 Stepper motors on other Axis.
4 axis csmio/ip-m Ethernet Motion controller with 24Vdc I/O System and Spindle speed Controller.
Leadshine Digital AM882 drives with stall detect.
Drives powered with Custom built 70Vdc Toroidal transformer.
24Vdc latching E-stop safety system controlling all High voltage devices.Inductive Homing and Limit switches on all axis.All cables shielded and running inside protective energy chain or conduit. Twin fan cooled Electrical compartment.

Just like Jazz, with the exception of the IP-M, you've just described the machine I'm building in a nutshell. Down to the pitches and diameters of the ballscrews, and the motor sizes...

Did someone from the forum build it or was it a commercial product?

I'll be watching your progress with interest to see what my machine might be capable of when its ready!! ;)

[JAZZCNC]

Did someone from the forum build it or was it a commercial product?

Andy that's what I'm saying. Think it's a machine I built for someone else. . . .That's why I know it's a good machine if it is one of mine.