Hybrid View
-
03-12-2020 #1
Last Activity: 03-01-2022
Hi Neil. i have sent PM.
-
06-12-2020 #2
Last Activity: 27-03-2025
If you can find spares easily this may be the way to go; if not then keep an eye open on Ebay for a few months, i purchased a Dronsfield Eagle Mk4 for £250 about 3 years ago, it still needs a rebuild but at least it came with all the bits That included the magnetic table. If you have the space the Jones and Shipman 540 with hydraulic table movement and auto feeds is a better bet. Also there are websites with rebuild methods in pictures for the J & S and bearings and seals are readily available.
Originally Posted by Roger the Dodger
Last edited by Colin Barron; 06-12-2020 at 10:56 PM.
-
The Following User Says Thank You to Colin Barron For This Useful Post:
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Addison Cut off Saw Restoration
By jamesgates1000 in forum Machine DiscussionReplies: 1Last Post: 12-11-2018, 08:06 PM -
DIY Surface grinder
By Robin Hewitt in forum General DiscussionReplies: 22Last Post: 11-11-2018, 12:33 PM -
Surface Grinder - Elliott 618 - Any Good?
By Chaz in forum Metalwork DiscussionReplies: 2Last Post: 30-08-2018, 01:51 PM -
NEW MEMBER: From grinder to 3D printing to CNC
By laranjas3 in forum New Member IntroductionsReplies: 2Last Post: 12-10-2017, 06:59 AM -
Pillar Drill Restoration
By Treemonkey in forum Machine DiscussionReplies: 0Last Post: 24-03-2013, 07:42 PM
Bookmarks