Threaded View
-
08-06-2020 #11
Last Activity: 15-07-2024
You have. It's called a CNC router. The trick is making the machine and your ability to register a pre-etched circuit board on it accurate enough. Something I haven't even atempted yet.
Originally Posted by Doddy
I do like using the solder paste. That and a gas soldering iron with a hot-air head makes hand-soldering SOIC chips nice sand easy and the 1.27mm (thats 0.05 inch for our 19th century readers) pad spacing is reliably makeable using the toner-transfer method for DIY circuit boards....without holes!!!
KitAn optimist says the glass is half full, a pessimist says the glass is half empty, an engineer says you're using the wrong sized glass.
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
BUILD LOG: 8x4 router build. Steel base & Aluminium gantry gantry
By D-man in forum DIY Router Build LogsReplies: 57Last Post: 13-12-2019, 10:43 AM -
BUILD LOG: Design stage - All steel - 1200x750x110 - aluminium capable (hopefully)
By oliv49 in forum DIY Router Build LogsReplies: 3Last Post: 08-06-2018, 01:18 PM -
welding steel base or just getting aluminium extrusion
By reefy86 in forum Gantry/Router Machines & BuildingReplies: 200Last Post: 15-01-2018, 08:55 AM -
BUILD LOG: Steel Frame, Aluminium Hybrid Design Thread
By f1sy in forum DIY Router Build LogsReplies: 0Last Post: 23-02-2016, 10:04 AM -
Steel vs Aluminium
By gavztheouch in forum Metalwork DiscussionReplies: 4Last Post: 26-05-2014, 10:11 PM
Bookmarks