All home switch fixings are now done, it is amazing how long the little jobs take, this was a whole afternoon. Milled up a little block to hold the Z switch, decided it would be better outside of the axis rather than inside regards adjustment. Then had to drill two very awkward 12mm holes in the X bearing plates with a portable drill, for this I had to mill up a drill guide, still easier than dismantling the gantry.

Click image for larger version.  Name: IMG_20200614_160329 (Large).jpg  Views: 2562  Size: 95.4 KB  ID: 28370 Click image for larger version.  Name: IMG_20200614_160351 (Large).jpg  Views: 2615  Size: 98.6 KB  ID: 28371 Click image for larger version.  Name: IMG_20200614_164852 (Large).jpg  Views: 2565  Size: 120.4 KB  ID: 28372 Click image for larger version.  Name: IMG_20200614_164954 (Large).jpg  Views: 2562  Size: 95.3 KB  ID: 28373 Click image for larger version.  Name: IMG_20200614_165056 (Large).jpg  Views: 2555  Size: 101.7 KB  ID: 28374