PC case control box

[HiltonSteve]

Can't open it here either.

May be quicker to re-post the original drawing that you did but dimension it up, that way I can re-draw it.

Steve.

[lateAtNight]

This is so annoying!
It just seems stupid that I spent all that time making the part, and then I have to make another drawing only for someone else to make another!

One last go... I messed around with settings, tried a bunch of different formats... hopefully something works.

If not I'll knock up the drawing this afternoon.

[lateAtNight]

Hurahhh!

I think I have finally got it!

It occurred to me whilst in the shower (I find the bathroom a great place to solve problems). DXF is a 2d format, yes? For some reason when I import my Maya file into Rhino it gets rotated 90 degrees so that when you look at it from the top all you see is line! So I thought maybe I need to rotate the object so that the drawing can be seen from the top view port, and sure enough I can now see the drawing in eDrawings viewer. So fingers crossed this works.

[John S]

Are you sure you want it 134" long ?

[lateAtNight]

134mm...

u sure thats not to do with your import settings, or the units the prog is set to use?

[HiltonSteve]

John, you are wrong its not 134 inch's long.

Its 3.4m!

Leave it with me, I will sort it out.