Hybrid View
-
04-12-2019 #1
X3 Super that has been converted to CNC with the Ending CNC ethernet controller, AM882 drivers, 68V power supply and coolant kit.
Working and just needs a PC or Laptop.
The X3 also has the ability to swivel the head up to 90 deg and has an R8 taper tool holder.
Complete complete with machine stand and ideal for a hobby engineer.
Due to size its better to pick up and can be seen working, but we can deliver on a pallet for £100.00 plus VAT. (UK mainland)
Please note the small DRO does not work, but apart from that the machine works fine.
We have mainly been using the machine for drilling and tapping, and it has only had about 100 hours of use.
Can be ordered online here
https://www.zappautomation.co.uk/x3-...onversion.html
Last edited by Gary; 09-12-2019 at 02:21 PM.
Visit Us: www.automationshop.co.uk
-
05-12-2019 #2
I also have a bit of tooling as well, that will be thrown in, like an ER collet holder and collets and a boring tool.
Last edited by Gary; 09-12-2019 at 11:02 AM.
Visit Us: www.automationshop.co.uk
-
09-12-2019 #3
-
09-12-2019 #4
Gary - your first post said that it had an MT3 taper but that looks like R8 tooling - could you confirm?
-
09-12-2019 #5Visit Us: www.automationshop.co.uk
-
02-01-2020 #6
Also Note that you can pay with card or on paypal credit if christmas was more expensive for your than you thought it would be.
Visit Us: www.automationshop.co.uk
-
10-03-2020 #7
sold
Visit Us: www.automationshop.co.uk
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Super-PID
By cropwell in forum Spindles & Drive MotorsReplies: 1Last Post: 29-07-2019, 11:55 AM -
Super sieg x3 conversions
By dazza in forum Milling Machines, Builds & ConversionsReplies: 2Last Post: 19-02-2014, 10:28 AM -
eBay: small milling machine Sieg Super X3
By Fivetide in forum Items On eBay UKReplies: 0Last Post: 19-11-2012, 01:48 PM -
Super X1L Suggested Accessories ?
By ecat in forum Milling Machines, Builds & ConversionsReplies: 7Last Post: 05-10-2010, 12:07 AM -
Sieg Super X3
By Gary in forum Milling Machines, Builds & ConversionsReplies: 2Last Post: 25-10-2008, 10:58 PM
Bookmarks