. .
  1. #1
    Hi all, this is my first post and I'm a newbie to CNC machining.
    I have a Harrison Alpha 330s plus and have been using it in manual and conversational mode and am very pleased with it.

    I am now trying to use it in full CNC mode but I am having trouble with the work offset and workshift settings.

    Firstly there is no work offset soft key (it's blank), although in the manual there is, it seems to have dissapeared! Is there a way of reinstating it? Via the parameters Maybe?

    But there is a work shift key and I have set the Z to zero on the stock and this is reflected in the absolute positions on the position page.

    I have deleted out the G54 in the part program and that has got rid of the incorrect G code alarm.

    Has anyone got an idiots guide how to set tool offsets and set the workshift as I seem to be struggling to set these correctly.
    Last edited by Sucram; 16-12-2019 at 03:50 PM.

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. 4th Axis Work Holding For Rectangular Work
    By magicniner in forum Workshop & Equipment
    Replies: 1
    Last Post: 20-10-2019, 03:02 AM
  2. WANTED: Harrison Alpha 330 or M300 converted to CNC, any condition.
    By mitip in forum Items Wanted
    Replies: 0
    Last Post: 09-05-2019, 02:55 PM
  3. Triple Offset Ring programming (Fanuc) HELP!
    By johngdh67 in forum General Discussion
    Replies: 0
    Last Post: 21-01-2019, 09:55 AM
  4. F360 - returns to machine zero not work offset
    By routercnc in forum Fusion 360
    Replies: 10
    Last Post: 21-01-2018, 01:40 AM
  5. WANTED: Need a tiny bit of work done on lathe
    By Tenson in forum Items Wanted
    Replies: 4
    Last Post: 28-02-2013, 12:22 AM


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts