. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 16-12-2019 #4
    m_c's Avatar
    Lives in East Lothian, United Kingdom.
    m_c
    Last Activity: 11 Hours Ago Forum Superstar, has done so much to help others, they deserve a medal. Has a total post count of 2,957. Received thanks 366 times, giving thanks to others 8 times.
    If you had an accurate DXF (or some form of file format suitable for getting accurate dimensions from), it should be a quick job for somebody with a CNC plasma table, followed by a quick buff on a linisher to clean up the edges.

    Failing that, it could be done by hand. Biggest issue is the relatively large holes in 1.5mm sheet may cause the sheet to twist if you're not careful.
    It's the kind of shape you could do just with a hacksaw/jigsaw, followed by a file.
    Avoiding the rubbish customer service from AluminiumWarehouse since July '13.
    Reply With Quote Reply With Quote

  2. The Following User Says Thank You to m_c For This Useful Post:

« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Making a Die?
    By Tenson in forum General Discussion
    Replies: 11
    Last Post: 06-01-2021, 09:44 AM
  2. Making horns.
    By simonms in forum Machine Discussion
    Replies: 17
    Last Post: 06-02-2015, 07:51 AM
  3. Making a little box
    By mark84 in forum General Discussion
    Replies: 5
    Last Post: 11-03-2014, 11:34 PM
  4. Photo Relief Carving for grandad, the war and involved in engineering
    By totts in forum CAD & CAM Software
    Replies: 6
    Last Post: 15-07-2013, 12:42 PM
  5. Making a Jig
    By Wobblybootie in forum Gantry/Router Machines & Building
    Replies: 3
    Last Post: 06-06-2010, 11:17 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules