mach3 wont reset keeps saying external emg stop requested

[Geoff57]

Jazz thanks for that i will go out to the shop and check these yes the relays come from VW

[Geoff57]

ok i have 240v going in but nothing on the output so it looks like the unit is dead goes with the led not lighting up out of interest what normal goes on these psu
once again many thanks for your help Geoff

[JAZZCNC]

ok i have 240v going in but nothing on the output so it looks like the unit is dead goes with the led not lighting up out of interest what normal goes on these psu
once again many thanks for your help Geoff

I'm not that deep into the electronics of how PSU works but it's worth taking out to see if it's got a fuse built into it. After that, I'd just buy another for sake of £10-15 quid.

[Geoff57]

hi Jazz
i will check to see if there is a fuse but something must have blown as you say might just as well get a new one at that price will let you know how i get on
Geoff

[Geoff57]

no fuse inside going to buy a new one looking on ebay there a loads of then could one of you good gentlemen point me in the right replacement see pics

Geoff