correct wiring sizes for JMC Servo iHSV57-30-18-36-21 with axbb-e controller

[the great waldo]

Hi Kitwin

Thanks for the information. Is it good practice to screen the power cables as well as the signal wires?

Cheers
Andrew

[JAZZCNC]

Hi Kitwin

Thanks for the information. Is it good practice to screen the power cables as well as the signal wires?

Cheers
Andrew

No it's not needed power cables but like Andy pointed out above you need to pay careful attention to how you route the wires.

For the Signal wires, Ethernet cable is a good choice as it uses twisted pairs and shield. Also, 1 Cable can do 2 drives for Step n Dir or if using Enables etc just one neat cable per drive as it as 8 wires.