Aluminium Profile Type Router - Initial questions

[CNCRY]

Hi All,

I've spent some more time on the design - moved the dual X motors to the back, and added a pulley based drive to the Y axis (borrowed from Andy's build log!)
Also shortened the plate fixing gantry to Y rails to give more Y cutting area. I expect I'll get 750mm out of the 1000mm total Y length.





For my Z axis, I'm planning to make this 350mm tall with 350mm rails and 265mm ballscrew.

I think I'm ready for a quote on linear components - would appreciate if someone could take a quick look and advise if there are any glaring issues?

These are sets from BST automation e.g https://www.aliexpress.com/item/3288...35f43557qd67J5
Ballscrew sets to include ballnut and mount, BK/BF supports and coupler.


2 set 1610 ballscrews X @ 965mm long
1 set 1610 ballscrew Y @ 1000mm (With Pulley Machining)
1 set 1605 Z @ 265mm (With Pulley Machining)
X rail set 2 x 1000mm rail and 4 x Hiwin 20mm Flanged Carriages
Y rail set 2 x 1000mm rail and 4 x Hiwin 20mm Carriages
Z rail set 1 x 350mm rails and 4 Hiwin 20mm Carriages

Thanks.
Ryan