Quote Originally Posted by CNCRY View Post
added a pulley based drive to the Y axis (borrowed from Andy's build log!)
I stole it from Joe, who I'm sure stole it from someone else. I'm reliably told it's called development!

Great progress Ryan, it's coming along.

Jazz's comments are spot on, and also your BK nearest the motor is back to front. Mention to Fred that your dimensions are for the screw part not total length else you'll end up short!

I'd recommend an F length of 30mm on Y and Z to give more room for those pulleys. Don't know if Jazz was saying 25 for the X couplings or the pulleys? Either way just gives more room to align that pulley.

I've noticed your gantry vertical plates are wider than the distance between carriages - the angle continues further than the carriage. Might be worth trimming that because it's essentially cosmetic in its current form and will be costing you when you order the plate.