Show and Tell - let us know what you're doing!

[Sterob]

Rather than continue hi-jacking Joe's thread I thought this belonged here:
Thanks to Jazzcnc sending me the g-code I can now apply for membership of the Aztec Club. The result is 400mm in diameter cut on 12mm MDF, I used to 60 degree cutter option that Dean sent me. It took just shy of 4 hours to cut. The cooling water for the spindle got to about 40C but no hotter. The whole machine was happy to run continuously for that long without any problems.
Now I know that it works so well I might try some more attractive timber.

Very nice Kit!