Which machine for headstones - please help.

[Boyan Silyavski]

I believe a plastic shielding collar ring and plate, similar like plasma torches have for sparks will stop at least all the mess that is going to flow up. And 2 plastic shield at the sides at the height of the gantry to pass freely, will save a lot of cleaning the side rails and bellows.

Anyway, that machine looks very nice.


No one has experience with the impact engravers to share?? Seem simple and cheap to make. Probably the software will have most impact on the result.

the machine bellow seem quite basic. probably there is a faster way to do it with a real servo machine

Anyone any idea about a pneumatic engraver to attach to my machine and do some tests?

[JAZZCNC]

Anyone any idea about a pneumatic engraver to attach to my machine and do some tests?

Something like this.? https://www.cncstepusa.com/cnc-dot-p...engraving-tool

[Boyan Silyavski]

Something like this.? https://www.cncstepusa.com/cnc-dot-p...engraving-tool

I have same same, they just have added collar. Now its not working properly and can not find the reason why. Sometimes works, sometimes not. Open it, dissassemble it. Its clean all seals on their places. Close it. One time works, one time not.

[JAZZCNC]

I have same same, they just have added collar. Now its not working properly and can not find the reason why. Sometimes works, sometimes not. Open it, dissassemble it. Its clean all seals on their places. Close it. One time works, one time not.

Upgrade it to something like this then, it should fit well with your beast...